cadopf.blogg.se - Flashing huawei y336

B 8038! Android download pmt is ready and layout has been changedLED.

Phone shows white screen,Sp Flash tool remains at 0%,Error 5054,Initialize scatter failed,Error 0X411,

Below we listed errors of SP Flash tool and there is a link to fix these errors.

If not works, then open the scatter file using windows Notepad+ and try to change _NODL_FAT to FAT by removing “_NODL_”.

Try to format your phone using Sp flash tool,.

So you have to Install Stock Rom to ON your phone.

May be, your current Rom is Corrupted or damaged.

after did, if does not works then leave a comment with error message.you Had better give us Screenshot.

automatically disconnecting during flashing Huawei phone If not works then Try again to install Stock Rom. If not works then boot into recovery mood and wipe the data ( Hard reset). Remove the battery for 60 seconds then insert back. stuck at Boot logo or BootloopĪ: Git it to 5min because first boot is Slow. If not works, then flash it again please go step by step. Congratulations, Now you successfully installed Stock Rom.Įrrors and Solutions Huawei phone not works after flashingĪ : Give it to 5min. Now disconnect your phone from PC and insert the battery and switch on the phone. ♥ Note– What is the Stock & Custom Rom? Firmware? Bootloader?Įnable OTG in Huawei phone – Need Root Step 7, after complete Flashing process, SP Flash tool indicate green right. after then, press Volume Up and Volume Down until the Huawei Device is detected by your PC. Now connect your Huawei Device to your PC or lap via data cable. Click the Download button to Begin Flash. Step 6, Start Flashing Stock Rom on Huawei Y336-U02.įinal Step. there is the catter file in the Stock Rom folder. Click the “Download tab”Īfter that, There is a button Called “Scatter-Loading”.

open Flash tool by Clicking “Flash tool.exe”Īfter open Flash tool. After that extract downloaded SP Flash tool.